Design and Fabrication of an X-Band Low Noise Amplifier Using FR-4 for Military Radar and Ground Station Receiver Applications
Main Article Content
Abstract
The low noise amplifier (LNA) plays an important role in the radiofrequency receiver front-ends, its main function is to amplify the weak receiving signal from the ground noise, as well as improving the receiver sensitivity. For LNAs which operate in the frequencies higher than the S-band, the printed circuit board (PCB) with high cost substrate materials have been used in almost designs so far, thus increasing the total price of the entire receiving unit. This paper introduces a new approach, in which a LNA has been designed using the FR-4 material, a common, low-cost substrate in PCB fabrication. The proposed LNA will maintain the quality of all of the important parameters such as gain, noise figure in compared with the LNAs designed by high cost material substrates. The stepped impedance matching technique is used in order to reach a balance between the circuit dimension and its efficiency. The frequency range of the proposed LNA lies within the X-band, which is a suitable range for military RADAR applications. Furthermore, it is possible to apply the desired LNA in the ground station receiver front-ends of a Low Earth Orbit (LEO) Earth Observation Satellite system
References
[2] E. L. Holzman, Wideband Measurement of The Dielectric Constant of An FR-4 Substrate Using A Parallel-coupled Microstrip Resonator, IEEE Transactions on Microwave Theory and Techniques, Vol. 54, No. 7, 2006, pp. 3127-3130, https://doi.org/10.1109/TMTT.2006.877061
[3] G. Girlando, G. Ferla, E. Ragonese, G. Palmisano, Silicon Bipolar LNAs in The X and Ku Bands, 9th International Conference on Electronics, Circuits and Systems, 2002, pp. 113-116.
[4] T. K. Thrivikraman, W. L. Kuo, J. P. Comeau, A. K. Sutton, J. D. Cressler, P. W. Marshall, M. A. Mitchell, A 2 mW, Sub-2 dB Noise Figure, SiGe Low-Noise Amplifier for X-band High-Altitude or Space-based Radar Applications, 2007 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium, 2007, pp. 629-632.
[5] F. Giannini, E. Limiti, A. Serino, V. Dainelli, A Medium-power Low-noise Amplifier for X-band Applications, 34th European Microwave Conference, 2004, pp. 37-39.
[6] E. Adabi, A. M. Niknejad, CMOS Low Noise Amplifier with Capacitive Feedback Matching, 2007 IEEE Custom Integrated Circuits Conference, 2007, pp. 643-646.
[7] T. V. Hoi, B. G. Duong, Study and Design of Wide Band Low-noise Amplifier Operating at C Band, VNU Journal of Science: Mathematics - Physics, Vol. 29, No. 2, 2013, pp. 16-24,
http://repository.vnu.edu.vn/handle/VNU_123/56223
[8] Junction Field Effect Transistor, https://www.electronics-tutorials.ws/transistor/tran_5.html (accessed on: August 16th, 2021).
[9] D. M. Pozar, Design of Microwave Amplifiers and Oscillators, Microwave Engineering, John Willey and Son, New York, 2005, pp. 600-654.
[10] B. Sindam, P. K. Sharma, J. Raju, Design and Analysis of Stepped Impedance Transformer from Air Filled Waveguide to Dielectric Filled Waveguide for High Power Microwave Window Applications, Materials Research Express, Vol. 1, No. 1, 2014, https://doi.org/10.1088/2053-1591/1/1/015701
[11] G. L. Ning, Z. Y. Lei, L. J. Zhang, R. Zou, L. Shao, Design of Concurrent Low-noise Amplifier for Multi-band Applications, Progress In Electromagnetics Research C, Vol. 22, 2011, pp. 165-178, https://doi.org/10.2528/PIERC11052405
[12] N. Snir, N. B. Helmer, R. Pasternak, D. Regev, A Packaged X-band Low Noise Amplifier, 2009 IEEE International Conference on Microwaves, Communications, Antennas and Electronics Systems, 2009, pp. 1-4.
[13] N. Sahin, M. B. Yelten, A 0.18 μm CMOS X-Band Low Noise Amplifier for Space Applications, 2017 New Generation of CAS (NGCAS), 2017, pp. 205-208.