Tran Hai Duc, Duong Thi Thanh Nhan, Nguyen Huy Sinh

Main Article Content

Abstract

Abstract: The enhancement of critical current density (Jc) in the (YBa2Cu3O7-d (YBCO)/Y2O3) ´ N multilayered films was reported. The (YBCO/Y2O3) ´ N multilayered films in which N was varied from 0 to 10 were prepared by using the pulsed laser deposition (PLD) technique. Magnetization data measured at 65 K showed that Jc of the (YBCO/Y2O3) ´ N multilayered films was enhanced in comparison with that of the pure YBCO film. More interestingly, the Jc enhancement was obtained to increase at small values of N, reach the maximum at N = 5, then decrease with increasing N to 10. The Jc enhancements in the (YBCO/Y2O3) ´ N multilayered films with N £ 5 were attributed to the increases in the number of single YBCO layers. The microstructure degradation in the (YBCO/Y2O3) ´ N multilayered films with N > 5 was likely to be reason for the decreases in their Jc, which was confirmed by using the scanning electron microscopy (SEM) images. 

Keywords: YBCO, critical current density Jc, multilayered films.

References

[1] P. Mele, K. Matsumoto, T. Horide, O. Miura, A. Ichinose, M. Mukaida, Y. Yoshita, and S. Horii, Control of Y2O3 nanoislands deposition parameters in order to induce defects formation and its influence on the critical current density of YBCO films, Physica C, 426-431, 1108 (2005).
[2] P. Mele, K. Matsumoto, T. Horide, O. Miura, A. Ichinose, M. Mukaida, Y. Yoshida and S. Horii, Tuning of the critical current in YBa2Cu3O7-x thin films by controlling the size and density of Y2O3 nanoislands on annealed SrTiO3 substrates, Supercond. Sci. Technol. 19 (2006) 44.
[3] J. L. MacManus Driscoll, S. R. Foltyn, Q. X. Jia, H. Wang, A. Serquis, L. Civale, B. Maiorov, M. E. Hawley, M. P. Maley and D. E. Peterson, Strongly enhanced current densities in superconducting coated conductors of YBa2Cu3O7–x + BaZrO3, Nat. Mater. 3 (2004) 439.
[4] K. Matsumoto, D. Takahara, T. Horide, A. Ichinose, S. Horii, Y. Yoshida, M. Mukaida and K. Osamura, High-Jc Gd-Ba-Cu-O Epitaxial Films Prepared by Pulsed Laser Deposition, IEEE Trans. Appl. Supercond. 15 (2005) 2719.
[5] A. A. Gapud, D. Kumar, S. K. Viswanathan, C. Cantoni, M. Varela, J. Abiade, S. J. and D. K. Christen, Enhancement of flux pinning in YBa2Cu3O7-a thin films embedded with epitaxially grown Y2O3 nanostructures using a multi-layering process, Supercond. Sci. Technol. 18 (2005) 1502.
[6] R. Kita, S. Kato, T. Nakamura, O. Miura, R. Teranishi, S. Yasunaga, H. Kai, M. Mukaida, A. Ichinose, K. Matsumoto, M. S. Horii and Y. Yoshida, Stability of barium oxides in REBa2Cu3Oy superconductors, Physica C, 468, 1391-1394 (2008).
[7] Q. X. Jia, S. R. Foltyn, P. N. Arendt and J. F. Smith, High-temperature superconducting thick films with enhanced supercurrent carrying capability, Appl. Phys. Lett., 80, 1601(2002).
[8] P.N. Barnes, T.J. Haugan, F.J. Baca, C.V. Varanasi, R. Wheeler, F. Meisenkothen, S. Sathiraju, Inducing self-assembly of Y2BaCuO5 nanoparticles via Ca-doping for improved pinning in YBa2Cu3O7- δ, Physica C, 469, 2029-2032 (2009).
[9] D. H. Tran, W. B. K. Putri, B. Kang, N. H. Lee and W. N. Kang, A close correlation between nanostructure formations and the thickness dependence of the critical current density in pure and BaSnO3 -added GdBa2Cu3O7-δ films, J. Appl. Phys, 115, 163901 (2014).
[10] B. W. Kang, A. Goyal, D. F. Lee, J. E. Mathis, E. D. Specht, P. M. Martin, D. M. Kroeger, M. Paranthaman and S. Sathyamurthy, Comparative study of thickness dependence of critical current density of YBa2Cu3O7− δ on (100) SrTiO3 and on rolling-assisted biaxially textured substrates, J. Mater. Res., 17, 1750 (2002).
[11] X. L. Wang, A. H. Li, S. Yu, S. Ooi, K. Hirata, C. T. Lin, E. W. Collings, M. D. Sumption, M. Bhatia, S. Y. Ding, and S. X. Dou, Thermally assisted flux flow and individual vortex pinning in Bi2Sr2Ca2Cu3O10 single crystals grown by the traveling solvent floating zone technique, J. Appl. Phys. 97, 10B114 (2005).